Great for sports bars, restaurants, sporting goods stores, sports arenas, auditoriums or anywhere that sports fans frequent.

All the same great features of PLUSH BUS in a new theme with new colors and graphics. This is the sports themed version of the PLUSH BUS. If know you are the man for the job.This SPORTS BUS CRANE Arcade Machine by ICE comes with product as pictures and a Bill Acceptor that takes $1's & $5's. Next time you are up at the facility please note how the ones on the left side do not flash in the correct pattern or sequence. I have a project when time allows as I would very much like to repair the chase lights sequence on the Mr Gattis Pizza Playland sign please.

So it is HOT 110 AC, then NEUTRAL 110 AC, then Common NEUTRAL 110 AC to all of your light strings, then the HOT #1, HOT #2, HOT #3 & HOT #4 (individually switched on and off by the TRIACs) go to each string of lights. Starting where you have the two white wires. I would test it first before investing in the caps to see if it is functional at all. Resolder the transformer terminals and then replace all the caps for a 99% guaranteed repair. The biggest failure is the electrolytic caps go bad from the heat of the board being mounted on the cranes ceiling. You failed to mention if anything was wrong with this board but I am assuming you havent had it hooked up. You mentioned 60 volt bulbs.If your crane has 60 volt bulbs, they are wired in series in pairs to create a 120 circuit. The 110 AC common is visible if you turn the board over and look at the traces at the connector pins. The outputs from the fuses go to the connector pins then to the AC HOT of each of your chase light strings. claw machine coin-operated Arcade by Betson Enterprises (circa 1980, and it's history and background, photos, repair help, manuals, for sale and wanted lists, and census survey), and it's history and background, photos, repair help, manuals, for sale and wanted lists, and census survey is brought to you by The International Arcade Museum at the Museum of the Game. The 110 AC in goes from the connector pins to the transformer. The chips generate a chase pattern that controls the TRIACs mounted to the aluminum heat sinks. In this case the board has 4 chase outputs of 110 volts AC. There is a pot in front of the transformer for the chase speed adjust. There is a zener diode to drop that voltage to near +5 volts dc for the ICs to use.Īnyways the circuitry for the chasing is 5 volts. The transformer drops 110v to possibly 12 volts. Yours appears to be the 4 circuit version (the number of TRIACS on the heatsink). There is a version of this board that has 4 chase circuits and a version that has 3 chase circuits. I have worked on literally hundreds of crane machines.

Betson big choice main pcb for sale